Ski-Doo Skandic Series 2016, Operator'S Manual

Page: 45 / 163

CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2016-008-202_a
OFF POSITION
To allow engine starting, the switch
must be in the ON position (UP).
mmo2016-008-201_a
ON POSITION
All operators of the snowmobile
should familiarize themselves with the
function of the emergency engine stop
switch by using it several times on first
outing and whenever stopping the en-
gine thereafter. This engine stopping
procedure will become a reflex and will
prepare operators for emergency situ-
ations requiring its use.
WARNING
If the switch has been used in an
emergency caused by a suspected
malfunction, the source of the mal-
function should be determined
and corrected before restarting
engine. See an authorized Ski-Doo
dealer for servicing.
7) Multifunction Switch
E-TEC and ACE Models
Multifunction switch is located on the
LH side of handlebar.
mmo2014-004-001_c
ALL MODELS EXCEPT 550F
1. Start button
2. Headlights dimmer switch
3. Heated grips
4. Heated throttle lever
5. Mode/set button
550F
Multifunction switch is located on the
LH side of handlebar.
mmo2007-003-003_a
550F MODELS
1. Headlights dimmer switch
2. Heated grips switch
3. Heated throttle lever switch
4. Start button
Start Button
Press to start engine. Refer to
ENGINE
STARTING PROCEDURE
in the
OPER-
ATING INSTRUCTIONS subsection.
_______________
43