Ski-Doo Skandic Series 2016, Operator'S Manual

Page: 55 / 163

CONTROLS, INSTRUMENTS AND EQUIPMENT
NOTE: Refer to decal on vehicle for
towing weight capacities.
WARNING
Never tow an accessory with a
rope. Always use a rigid tow bar.
Using a rope would result in a col-
lision between the object and the
snowmobile and possibly in a tip
over in case of a rapid deceleration
or on a downward slope.
J-Type Hitch (European Models)
Attaching an Equipment
mmo2011-007-012_a
1. Hairpin clip
2. Safety tab
1. Remove the hairpin clip.
2. Align accessory attachment hole
with the hitch hook.
3. Push the accessory attachment
passed the safety tab.
4. Secure safety tab using the hairpin
clip.
Detaching an Equipment
1. Remove the hairpin clip.
2. Push safety tab forward to free ac-
cessory attachment from the hitch.
3. Detach accessory attachment.
4. Install hairpin clip.
21) Hood
WARNING
Never operate engine with hood
removed from vehicle.
Hood Removal
1. Remove upper side panels as ex-
plained in this subsection.
2. Unhook the rubber ties on both
sides.
mmo2009-004-038_a
1. Rubber tie
3. Slide hood towards front to free the
tabs from their slots.
Hood Installation
1. Engage the tabs located at front and
center of the hood into the bottom
pan slots.
mmo2011-007-001_a
TYPICAL
1. Hood tabs
2. Bottom pan slots
2. Slide hood towards headlights until
it stops.
_______________
53