Ski-Doo Skandic Series 2016, Operator'S Manual

Page: 86 / 163

MAINTENANCE SCHEDULE
600 ACE and 900 ACE Models
EVERY 1 500 KM (1,000 MI)
Models with gearbox: Check oil level
EVERY 3 000 KM (2,000 MI) OR 1 YEAR
(WHICHEVER COMES FIRST)
Inspect heat shields
Visually inspect and clean drive pulley
Tighten drive pulley retaining screw to specified torque
Clean driven pulley
Check driven pulley preload
Adjust and align track
Inspect brake hose, pads and disk
Inspect steering mechanism
Inspect front suspension
Inspect rear suspension (including stopper straps and slider shoes)
Lubricate rear and front suspension. Lubricate whenever the vehicle is used in wet
conditions (rain, puddles)
Inspect ski leg, bushing and bearing. Replace if needed.
EVERY 6 000 KM (4,000 MI) OR AT PRE-SEASON
(WHICHEVER COMES FIRST)
Change engine oil and filter
EVERY 6 000 KM (4,000 MI) OR 2 YEARS
(WHICHEVER COMES FIRST)
Replace fuel pump outlet filter
Replace brake fluid
Inspect drive pulley slider shoes and ramps and replace if needed
Lubricate splines of the countershaft
EVERY 10 000 KM (6,000 MI) OR 3 YEARS
(WHICHEVER COMES FIRST)
Replace spark plugs
84
______________