Ski-Doo Skandic Series 2016, Operator'S Manual

Page: 65 / 163

OPERATING MODES (600 ACE AND 900 ACE ONLY)
To activate Sport mode when in Stan-
dard mode, press top end of switch
once.
To activate Sport mode when in ECO
mode, press top end of switch twice.
To activate Standard mode when in
ECO mode, press top end of switch
once.
WARNING
When adjusting modes, be sure to
maintain situational awareness of
other snowmobiles, obstacles, or
persons .
Learning Key Modes
The learning key provides a mode of
operation whereby engine torque and
speed are limited.
NOTE: The initial learning key pro-
gramming can limit the speed
to 40 km/h (25 MPH) or 70 km/h
(43 MPH). Refer to your authorized
Ski-Doo dealer to modify this setting.
There are 3 levels available for the
learning key mode.
Changing Learning Key Settings
To change learning key setting, carry
out the following:
1. Press the START/electronic reverse
button to wake up the electrical sys-
tem and install the NORMAL key on
the engine cut-off switch.
2. Wait for the information center to
complete its self-test and display
the key recognition message.
Analog/Digital Gauge
3. Press the SET button until LEArn is
visible in the digital screen of the in-
formation center.
mmo2014-004-001_f
MULTIFUNCTION GAUGE
1. MODE function
2. SET function
All Models
4. Use the heated grip switch to toggle
the key setting between 1 and 3.
mmo2014-004-002_a
TYPICAL
1. Heated grip switch
2. Increase
3. Decrease
NOTE: Setting 1 is the lowest avail-
able torque, while setting 3 is the high-
est available torque for learning key.
5. After a few seconds, the setting is
automatically confirmed and saved.
NOTE: The key speed setting is appli-
cable to any key of the same type used
on a specific snowmobile. The same
key type used on a different snowmo-
bile may therefore have a different key
speed setting.
NOTE: Vehicle performance may vary
depending on riding conditions.
_______________
63