EN
6. Installation
6
- 53 -
951-171-021
Version 02
Mounting the pressure control valve Fig. 11
2
3
3.1
8
6.6 Mount pressure control valve
Protect each pump element by means of
a pressure control valve suitable for the
planned maximum admissible operating
pressure of the centralized lubrication
system.
Observe the information given
in chapter 4 regarding the
adapter required for certain
reservoir sizes.
To carry out the assembly proceed as
follows:
•
Remove the closure plug (3.1) from the
pump element (3)
•
Screw pressure control valve (8) into
pump element (3)
•
Repeat procedure for each pump
element
Tightening torque = 6 Nm -0.5 Nm
[4.43 ft.lb. - 0.07 ft.lb.]
Summary of Contents for LINCOLN P203
Page 84: ...EN 16 Annex 84 951 171 021 Version 02 16 China RoHS Table...
Page 85: ...Notes...
Page 86: ...Notes...
Page 87: ...Notes...