SKF LINCOLN P203, Original Assembly Instructions

Page: 17 / 88

1
- 17 -
951-171-021
Version 02
EN
1. Safety instructions
○
Carry out electrical connections only ac-
cording to the information in the valid
wiring diagram and taking the relevant
regulations and the local connection con-
ditions into account
○
Do not touch cables or electrical compo-
nents with wet or damp hands
○
Fuses must not be bypassed Replace de-
fective fuses always by fuses of the same
type
○
Ensure proper connection of the protec-
tive conductor in case of products of pro-
tection class I
○
Observe the stated type of protection
○
Undertake drilling at non-critical, non-
load bearing parts only. Use any available
boreholes. Do not damage lines and ca-
bles when drilling.
○
Observe possible abrasion points. Protect
the parts accordingly
○
Ensure through suitable measures that
movable or detached parts are immobi-
lized during the work and that no limbs
can be caught in between by inadvertent
movements
○
Assemble the product only outside of the
operating range of moving parts, at an
adequate distance from sources of heat
or cold. Other units of the machine or ve-
hicle must not be damaged or impaired in
their function by the installation
○
Dry or cover wet, slippery surfaces
accordingly
○
Cover hot or cold surfaces accordingly
○
Work on electrical components must be
carried out by electrical specialists only.
Observe any waiting periods for dis-
charging, if necessary
○
Carry out works on electrical components
only while the system is depressurized
and use voltage isolated tools suitable for
electrical works only
1.23 Transport, installation, maintenance,
malfunctions, repair, shutdown,
disposal
○
All relevant persons must be informed
of the activity prior to starting any work.
Observe the precautionary operational
measures and work instructions
○
Carry out transport using suitable trans-
port and hoisting equipment on suitable
ways only
○
Maintenance and repair work can be
subject to restrictions at low or high tem-
peratures (e.g. changed flow properties of
the lubricant). Therefore, where possible,
try to carry out maintenance and repair
work at room temperature.
○
Prior to performing work, the product
and the machine, into which the product
will be integrated, must be depressur-
ized and secured against unauthorized
activation