SKF LINCOLN P203, Original Assembly Instructions

Page: 49 / 88

EN
6. Installation
6
- 49 -
951-171-021
Version 02
Mounting bores for pumps with 11 l [2.9 gal.] or 15 l [3.96 gal.] reservoir Fig. 7
1,0 mm
[0.039 in.]
D1
D3 D3
D2
Pumps with 11 l [2.9 gal.] or 15 l [3.96 gal.]
reservoir
Are fixed on the lower mounting bores (A) or
(B) and (C) of the pump housing and addi-
tionally on the 2 upper mounting points (D).
Fastening (A) and (B), see pre-
vious Figure.
Fastening on top on the fixing angle by
means of:
2 screws
M8 (8.8)
2 hexagon nuts M8 (8.8)
2 washers 8
Tightening torque = 18 Nm ± 1.0 Nm
[13.27 ft.lb. ± 0.74 ft.lb.]
Diameter of the bores at the upper fixing
angle =
Ø
10.4 mm [10 in.].
Reservoir 11l [2.90 gal.]
D1 = 557 mm [21.93 in.]
D2 = 160 mm [6.30 in.]
D3 = 80 mm [3.15 in.]
Reservoir 15 l [3.96 gal.]
D1 = 675 mm [26.57 in.]
D2 = 160 mm [6.30 in.]
D3 = 80 mm [3.15 in.]
C