SKF LINCOLN P203, Original Assembly Instructions

Page: 13 / 88

1
- 13 -
951-171-021
Version 02
EN
1. Safety instructions
1.3 Intended use
Supply of lubricants within a centralized lu-
brication system following the specifications,
technical data and limits stated in these
Instructions:
The product is intended exclusively for inte-
gration into a different machine.
Usage is allowed exclusively for professional
users in the frame of commercial and eco-
nomic activities.
1.4 Foreseeable misuse
Any usage differing from the one stated in
these Instructions is strictly prohibited, par-
ticularly a usage:
○
outside the indicated ambient tempera-
ture range
○
with non-specified means of operation
○
without adequate pressure control valve
○
in continuous operation
○
of C3 versions in areas with aggressive
and corrosive materials (e.g. with high
salt concentration)
○
of plastic parts in areas with high ozone
levels or in areas with harmful radiation
(e.g. ionising radiation)
○
to supply, transport, or store hazardous
substances and mixtures in accordance
with annex I part 2-5 of the CLP regula-
tion (EG 1272/2008) or HCS 29 CFR
1910.1200 marked with GHS01-GHS06
and GHS08 hazard pictograms
○
to feed, forward, or store gases, liquefied
gases, dissolved gases, vapours, or fluids
whose vapour pressure exceeds normal
atmospheric pressure of 1013 mbar
[14.69 psi] by more than 0.5 bar [7.25
psi] at the maximum permissible operat-
ing temperature.
○
in an explosion protection zone
1.5
Modifications of the product
Unauthorized conversions or modifica-
tions may result in unforeseeable impacts
on safety. Therefore, any unauthorized
conversions or modifications are expressly
prohibited.
1.6 Prohibition of certain activities
Due to potential sources of faults that may
not be visible or due to legal regulations
the following activities may be carried out
by manufacturer specialists or authorized
persons only:
○
Repairs or changes to the drive
○
Replacement of or changes on the pis-
tons of the pump elements
1.7 Painting of plastic parts
Painting of any plastic parts or seals of the
described products is expressly prohibited.
Remove or tape plastic parts completely be-
fore painting the superior machine