manualshive.com logo in svg

Sirona XIOS XG, Operating Instructions And Installation, Page: 48 / 80

Share
Download
Sirona XIOS XG Operating Instructions And Installation Download Page 48

 64 09 713 D3610

48

D3610

.

201.01.08

.

02 09.2016

5 Operation

Sirona Dental Systems GmbH

5.4 Position the sensor

Operating Instructions and Installation XIOS XG USB module and sensors

5.4.2.2

Posterior tooth exposures

Preparing the sensor holder

For posterior tooth exposures use the yellow sensor holders.
1. For the right upper jaw and left lower jaw: Fasten the guide rod for the 

sensor holder (C) in the perforation (B) of the localizer ring (A).

2. For the left upper jaw and right lower jaw: Fasten the guide rod for the 

sensor holder (E) in the perforation (D) in the localizer ring (A).

3. Slide the sensor into the hygienic protective sleeve, see section 

"Slide the hygienic protective sleeve over the sensor".

4. Place the sensor on the palm of your hand and clip the sensor holder 

onto the sensor.

5. Push the sensor into the sensor holder up to the stop.

Summary of Contents for XIOS XG

















































































Reviews:

No comments