64 09 713 D3610
D3610
.
201.01.08
.
02 09.2016
33
Sirona Dental Systems GmbH
5 Operation
Operating Instructions and Installation XIOS XG USB module and sensors
5.1 Enable exposure readiness
båÖäáëÜ
5
Operation
5.1
Enable exposure readiness
✔
The USB module and the sensor are installed in accordance with the
instructions in the "Installation" [ → 26] section.
1. Connect a sensor to the USB module.
2. Register the patient in SIDEXIS XG / SIDEXIS 4. Detailed information
can be found in the SIDEXIS XG / SIDEXIS 4 operator's manual.
3. Establish exposure readiness for intraoral exposures. Click on the
"[I]ntraoral X-ray" button.
The
"Set tooth or program before exposure" window opens. The
intraoral exposure is selected as the image type.
4. Click on the tooth for which the intraoral exposure is being produced.
Information on the tooth displays can be found in the SIDEXIS XG /
SIDEXIS 4 operator's manual. Confirm your selection with the
"OK"
button.
The
"Select X-ray device" window appears where multiple
intraoral X-ray system are registered in SIDEXIS XG / SIDEXIS 4.