THERMAL RECEIPT PRINTER
34
4
Character width selection. See Table 1.
5
6
7
Table 1 Table 2
Character Width Selection
Hex Decimal Width
00 0
1(normal)
10 16
2(double-width)
20 32
3
30 48
4
40 64
5
50 80
6
60 96
7
70 112
8
Table 1 Table 2
Character Height Selection
Hex Decimal Width
00 0
1(normal)
10 16
2(double-height)
20 32
3
30 48
4
40 64
5
50 80
6
60 96
7
70 112
8
[Details]
This command is all characters (alphanumeric and Kanji) effective except for
HRI characters.
If n is outside of the defined range, this command is ignored.
In standard mode, the vertical direction is the paper feed direction, and the
horizontal direction is perpendicular to the paper feed direction. However,
when character orientation changes in 90
clockwise-rotation mode, the
relationship between vertical and horizontal directions is reversed.
In page mode, vertical and horizontal directions are based on the character
orientation.
When characters are enlarged with different sizes on one line, all the
characters on the line are aligned at the baseline.
The
ESC !
command can also turn double-width and double-height modes on
or off. However, the setting of the last received command is effective.
[Default] n = 0
[Reference]
ESC !