Sinocan P11-USL, Programming Manual, Page: 10 / 52

THERMAL RECEIPT PRINTER 10
printable area using
ESC T
, the vertical motion unit ( y) is used.
• The maximum right-side spacing is 255/180 inches. Any setting exceeding the
maximum is converted to the maximum automatically.
[Default] n = 0
[Reference]
GS P
ESC !
n
[Name] Select print mode(s)
[Format] ASCII ESC !
n
Hex 1B 21 n
Decimal 27 33 n
[Range] 0 ≤ n ≤ 255
[Description] Selects print mode(s) using n as follows:
Bit Off/On Hex Decimal Function
0 Off 00 0 Character font A (12 ╳ 24).
On 01 1 Character font B (9 ╳ 17).
1 - - - Undefined.
2 - - - Undefined.
3 Off 00 0 Emphasized mode not selected.
On 08 8 Emphasized mode selected.
4 Off 00 0 Double-height mode not selected.
On 10 16 Double-height mode selected.
5 Off 00 0 Double-width mode not selected.
On 20 32 Double-width mode selected.
6 - - - Undefined.
7 Off 00 0 Underline mode not selected.
On 80 128 Underline mode selected.
[Details] • When both double-height and double-width modes are selected, quadruple size
characters are printed.
• The printer can underline all characters, but can not underline the space set by
HT
or 90° clockwise rotated characters.
• The thickness of the underline is that selected by
ESC
 , regardless of the
character size.
• When some characters in a line are double or more height, all the characters
on the line are aligned at the baseline.
•
ESC E
can also turn on or off emphasized mode. However, the setting of the
last received command is effective.
•
ESC —
 can also turn on or off underline mode. However, the setting of the last
received command is effective.
•
GS !
can also select character size. However, the setting of the last received
command is effective.
• Emphasized mode is effective for alphanumeric and Kanji. All print modes
except emphasized mode is effective only for alphanumeric.
[Default] n = 0
[Reference]
ESC -
,
ESC E
,
GS !