THERMAL RECEIPT PRINTER
19
• When setting
n
= 8, the print position is moved to column 9 by sending
HT
.
• Up to 32 tab positions (
k
= 32) can be set. Data exceeding 32 tab positions is
processed as normal data.
• Transmit
[ n] k
in ascending order and place a NUL code 0 at the end.
• When
[ n] k
is less than or equal to the preceding value [
n] k-
1, tab setting is
finished and the following data is processed as normal data.
•
ESC D NUL
cancels all horizontal tab positions.
• The previously specified horizontal tab positions do not change, even if the
character width changes.
• The character width is memorized for each standard and page mode.
[Default] The default tab positions are at intervals of 8 characters (columns 9, 17, 25,...) for
font A (12
╳
24).
[Reference]
HT
ESC E
n
[Name] Turn emphasized mode on/off
[Format] ASCII ESC E n
Hex 1B 45 n
Decimal 27 69 n
[Range] 0 <=
n <=
255
[Description] Turns emphasized mode on or off
•
When the LSB of n is 0, emphasized mode is turned off.
•
When the LSB of n is 1, emphasized mode is turned on.
[Details] •
Only the least significant bit of n is enabled.
•
This command and
ESC !
turn on and off emphasized mode in the same way.
Be careful when this command is used with
ESC !
.
[Default] n = 0
[Reference]
ESC !
ESC G
n
[Name] Turn on/off double-strike mode
[Format] ASCII ESC G
n
Hex 1B 47
n
Decimal 27 71
n
[Range] 0
≤
n
≤
255
[Description] Turns double-strike mode on or off.
• When the LSB of
n
is 0, double-strike mode is turned off.
• When the LSB of
n
is 1, double-strike mode is turned on.
[Details] • Only the lowest bit of
n
is enabled.
• Printer output is the same in double-strike mode and in emphasized mode.
[Default]
n
= 0
[Reference]
ESC E
ESC J
n
[Name] Print and feed paper
[Format] ASCII ESC J
n
Hex 1B 4A
n