THERMAL RECEIPT PRINTER
15
to not print a dot.
• If the width of the printing area set by
GS L
and
GS W
less than the width
required by the data sent with the
ESC *
command, the following will be
performed on the line in question (but the printing cannot exceed the maximum
printable area):
①
The width of the printing area is extended to the right to accommodate the
amount of data.
②
If step
①
does not provide sufficient width for the data, the left margin is
reduced to accommodate the data.
• After printing a bit image, the printer returns to normal data processing mode.
• This command is not affected by print modes (emphasized, double-strike,
underline, character size or white/black reverse printing), except upside-down
printing mode.
• The relationship between the image data and the dots to be printed is as
follows:
• When 8-dot bit image is selected:
• When 24-dot bit image is selected: