THERMAL RECEIPT PRINTER
22
13 Korea
14 Slovenia/Croatia
15 Chinese
The character sets for Slovenia/Croatia and China are supported only in the Simplified Chinese
model.
[Default] Simplified Chinese model:
n
= 15
Models other than the Simplified Chinese model:
n
= 0
ESC S
[Name] Select standard mode
[Format] ASCII ESC S
Hex 1B 53
Decimal 27 83
[Description] Switches from page mode to standard mode.
[Details]
This command is effective only in page mode.
Data buffered in page mode are cleared.
This command sets the print position to the beginning of the line.
The printing area set by
ESC W
are initialized.
This command switches the settings for the following commands (in which the
values can be set independently in standard mode and page mode) to those for
standard mode:
①
Set right-side character spacing:
ESC SP, FS S
②
Select default line spacing:
ESC 2, ESC 3
The following commands are enabled only to set in standard mode.
①
Set printing area in page mode:
ESC W
②
Select print direction in page mode:
ESC T
The following commands are ignored in standard mode.
①
Set absolute vertical print position in page mode:
GS $
②
Set relative vertical print position in page mode:
GS \
Standard mode is selected automatically when power is turned on, the printer is
reset, or command
ESC @
is used.
[Reference]
FF
,
ESC FF
,
ESC L
ESC T
n
[Name] Select print direction in page mode
[Format] ASCII ESC T n
Hex 1B 54 n
Decimal 27 84 n
[Range] 0 <=
n <=
3
48 <=
n <=
51
[Description] Selects the print direction and starting position in page mode.
n specifies the print direction and starting position as follows:
n
Print Direction
Starting Position
0, 48
Left to right
Upper left