THERMAL RECEIPT PRINTER
23
1, 49
Bottom to top
Lower left
2, 50
Right to left
Lower right
3, 51
Top to bottom
Upper right
[Details]
When the command is input in standard mode, the printer executes only
internal flag operation. This command does not affect printing in standard
mode.
This command sets the position where data is buffered within the printing area
set by
ESC W
.
Parameters for horizontal or vertical motion units ( x or y) differ as follows,
depending on the starting position of the printing area:
①
If the starting position is the upper left or lower right of the printing area, data
is buffered in the direction perpendicular to the paper feed direction:
Commands using horizontal motion units:
ESC SP
,
ESC $
,
ESC \
Commands using vertical motion units:
ESC 3
,
ESC J
,
GS $
,
GS \
②
If the starting position is the upper right or lower left of the printing area, data
is buffered in the paper feed direction:
Commands using horizontal motion units:
ESC 3
,
ESC J
,
GS $
,
GS \
Commands using vertical motion units:
ESC SP
,
ESC $
,
ESC \
[Default] n = 0
[Reference]
ESC $
,
ESC L
,
ESC W
,
ESC \
,
GS $
,
GS P
,
GS \
ESC V
n
[Name] Turn 90
clockwise rotation mode on/off
[Format] ASCII ESC V n
Hex 1B 56 n
Decimal 27 86 n
[Range] 0 <=
n <=
1, 48 <=
n <=
49
[Description] Turns 90
clockwise rotation mode on/off
n is used as follows:
n Function
0, 48
Turns off 90
clockwise rotation mode
1, 49
Turns on 90
clockwise rotation mode