Function Test
No operation unless:
you have fully understood and implemented the safe operation rules specified in this
manual.
1. Avoid dangerous situation occurred.
2. Always carry out pre-operation inspection
3. Always do function test before operation.
Read and understand function test before going to next steps.
4. Inspect workplace.
5. Only use the machine as per its design intention.
Basic Principles
The purpose of function test is to find faults before operation. Operators must follow instructions
to check all functions step by step.
Machine with faults is not allowed to use. Operators must stop use and make marks when faults
are found. As required by the manufacturer, only qualified technicians are allowed to repair the
machine.
After maintenance, operators must implement pre-operation inspection and function test before
operation.
Preparation for function test
1
、
Choose a strong and horizontal area without any obstructions as test zone
2
、
Make sure batteries are connected.
15
