Explosion and Fire Hazard
Do NOT use the machine at hazardous places or places full of flammable or explosive gas or
particles.
Damage Hazard to the Machine
Do NOT use the machine when there is damage or breakdown.
Operators shall thoroughly check the machine and test all functions before operation. Damaged or
broken machine shall be identified and no operation is allowed.
Make sure that all maintenance is done according to this manual and relevant service manual.
Make sure that all labels are in correct position and easy to be identified.
Make sure that operator manual and service manual are in good condition, legible and kept in the
storage container on the platform.
Body Injury Hazard
Do NOT operate the machine if there is leakage of hydraulic oil, which may penetrate and burn
people’s skin.
Touching any parts under the broad plate by error will lead to bad injury. Only maintenance people
trained can check the bulkheads.
Suggestion: Operators can inspect and repair the machine only during pre-operation inspection.
During operation, all bulkheads shall be closed and locked.
Safety of the Weld Line to the platform
DO read, understand and obey all the warnings and instructions attached for the welding devices.
Connect weld lines or cables ONLY when the welding devices are turned off.
Operations ONLY after the welding cables are correctly connected.
Locked after each Use
1
、
Select a safety stop position where solid ground, no obstruction and away from intense traffic.
2
、
Lower down platform.
3
、
Turn the key switch to “Off” position and unplug key to avoid authorized use.
4
、
Use a wedge to hold machine.
5
、
Charge battery.
10