Tip-over Hazard
No overload on the platform is allowed.
GTJZ0407SE
Max. Load of platform
Retracting
240kg
Extending—extension only
100kg
The machine can only be lifted or extended when the machine is on solid and level ground.
Do NOT take tilt alarm as level indicator. The tilt alarm on platform works only when the machine
is seriously tilted.
Once the tile alarm rings:
Lower down the platform. Move the machine to solid and level ground. Carefully lower down the
platform if tilt alarm rings during platform lifting. No changes to limit switch is allowed.
Travel speed should be controlled within 0.5m/h during platform lifting.
When the platform is lifted, do NOT drive on or near slope or unstable ground or under other
dangerous conditions.
No operation in strong or fitful wind. Do NOT increase the surface area of platform or loads
exposed in the wind; otherwise it will reduce the stability of the machine.
When platform is stowed, the machine shall be driven extremely carefully at low speed on uneven
area, steep slope, gravel road, slippery ground and places near cave.
Do not drive the machine on the ramp that exceeds the maximum climbing capacity of the
machine .The maximum climbing ability is applicable to the machine in the receiving state.
6
