Simu TSA Hz 2, Programming Manual

Page: 5 / 26

2.5" (63)
3.0" (78)
3.5" (89)
2.5" (63)
3.0" (78)
3.5" (89)
2.5" (63)
3.0" (78)
3.5" (89)
2.5" (63)
3.0" (78)
3.5" (89)
2.5" (63)
3.0" (78)
3.5" (89)
2.5" (63)
3.0" (78)
2.5" (63)
3.0" (78)
5 ft.
(1.50m)
6.5 ft.
(2.00m)
8 ft.
(2.40m)
9 ft.
(2.70m)
10 ft.
(3.00m)
16.5 ft.
(5.00m)
13.5 ft.
(4.00m)
Projection
of Arms
Roller Tube
O.D. Sizes
550
550
This chart can be used to select the most suitable type of
motor for your lateral arm awning system.
Important: The lateral arms referred to here are the
standard aluminum type with built-in tension springs. When
considering arms made of steel and/or using other types of
spring mechanisms, please request additional information.
1. Locate the projection of your lateral arm on the above
chart at point (A); e.g. 5 ft., 6 ft., 8 ft., etc.
2. Determine which roller tube diameter (D) is being used in
your installation.
3. Locate the number of arms (B) and the length of your
installation (C).
4. Read the correct motor from the chart at the intersection
of your selections.
NOTE:
Because this chart must take into consideration lateral arms
being manufactured by many different companies, it is only
approximate. The relationship between the number of arms
and the length of the awning is only a guide and will vary
slightly from manufacturer to manufacturer.
Above chart is approximate.
For more specific
information, refer to factory.
B Number of Arms
C Length of Installation
A D
1 Pair
(2 arms)
20 ft. (6m)
2 Pair
(4 arms)
33 ft. (10m)
3 Pair
(6 arms)
50 ft. (15m)
4 Pair
(8 arms)
66 ft. (20m)
5 Pair
(10 arms)
82 ft. (25m)
6 Pair
(12 arms)
100 ft. (30m)
535 550
535
550
535
550
525
535
535
550
550
550
550
550
535
550
550
550
550
550
550
525
Hz Motor Selection Guide
For Retractable Awning Systems
R
5