Simu TSA Hz 2, Programming Manual

Page: 11 / 26

One motor to one wireless switch.
1) Setting Direction of Rotation
The motor will be in “ Factory Mode ” right out of the box when power is
connected. To prepare the motor for programming, press the transmitter
up and down buttons simultaneously until motor jogs forward and back
(example 1) .
Hold the transmitter within
10 feet of the moto r and press the up button
(example 2) . If the motor rotates in the up direction, move to step 2
programming.
If the motor, goes down instead of up, press and hold the stop button
until the motor bounces forward and back
(example 3) . Confirm the
up button now makes the shutter go up.
IMPORTANT -The motor is supplied in “Factory Mode”. Set direction of
rotation (1) before pressing the program button.
2) Programming the Transmitter
Hold the transmitter within 10 feet of the motor head (example 4) .
Press and hold the Program Button (about 1 second) until the motor
jogs forward and then back. Transmitter range will now be
approximately 100 ft.
You can now proceed to the up and down limit settings.
Hz 2 Type 5 / DMI Operator
Scenarios
R
Program Button
Press the up button
Press the up and down
button simultaneously to
awake the motor.
If the shutter goes down instead
of up, press and hold the stop button
until the motor jogs forward then back.
(example 2)
(example 1)
(example 3)
(example 4)
F C C
Label
Back of transmitter
12