Simu TSA Hz 2, Programming Manual

Page: 13 / 26

Single motor to multiple wireless switches. There is a limit of 12
transmitters of any type to one motor.
2) Programming the 1st Transmitter
After
Hold the transmitter within 10 feet of the motor head (example 4) .
Press and hold the Program Button (about 1 second) until the motor
jogs forward and back. Transmitter range will now be approximately 100 ft.
3
) Programming additional transmitters
the motor has memorized the first transmitter as above in example 4.
Press the Program Button on the transmitter that has already been memorized
until the motor jogs forward then back. Press the Program Button of the second
transmitter until the motor jogs forward then back (example 5) . Repeat for all
transmitters to control this motor (12 max per motor).
You can now proceed to the up and down limit settings.
Hz Type 5 / DMI Operator
Scenarios
1) Setting Direction of Rotation
The motor will be in “ Factory Mode ” right out of the box when power is
connected. To prepare the motor for programming, press the transmitter
up and down buttons simultaneously until motor jogs forward and back
(example 1) .
Hold the transmitter within
10 feet of the moto r and press the up button
(example 2) . If the motor rotates in the up direction, move to step 2
programming.
If the motor, goes down instead of up, press and hold the stop button
until the motor bounces forward and back
(example 3) . Confirm the
up button now makes the shutter go up.
R
(example 5)
Program Button
Press the up button
Press the up and down
button simultaneously to
awake the motor.
If the shutter goes down instead
of up, press and hold the stop button
until the motor jogs forward then back.
(example 2)
(example 1)
(example 3)
(example 4)
FCC
Label
Back of transmitter
FCC
Label
Back of transmitter
Program Button second transmitter
14