Operation
3
850--160139 / A
1. CURSOR JOYSTICK
This joystick is used to move the yellow cursor (+) on the display,
and can be used for the following purposes, which will be
described thoroughly for each function later in this chapter:
·
Distance, bearing and depth indication
for any position on the screen, with the readouts in yellow
figures in the upper right-hand corner (lower corner for
omni/vertical modes).
·
Target marker positioning
when using the TARGET MARKER push button.
·
Målmarkør-posisjonering
ved bruk av MÅLMARKØR trykknappen.
·
Circle marker positioning
when using the CIRCLE MARKER push button.
·
Manual target tracking
for calculation of the target movement between the two latest
selected TARGET MARKERS.
·
Selection of position to be tracked
when using the POSITION TRACK push button.
·
Selecting of target to be tracked
when moving the cursor to a target and using the TARGET
TRACK push button.
·
Selecting of new display centre
when using the DISPLAY CENTRE push button in TRUE
MOTION mode.
The joystick can be moved in any direction. The speed of the
cursor increases with the movement of the joystick. The joystick
is self-centring, and the cursor will remain in the selected position
until it is used for one of the above-mentioned purposes.
Summary of Contents for SD570
