Simplicity Regent Series, Operator'S Manual

Page: 18 / 184

MAINTENANCE SCHEDULE & PROCEDURES
The following schedule should be followed for normal care of your tractor and mower.
Regular
Maintenance
18
Check Tire Pressures
Tire Pressure should be checked periodically, and maintained at
the levels shown in the chart (Figure 6). Note that these
pressures may differ slightly from the “Max Inflation” stamped on
the side-wall of the tires. The pressures shown provide proper
traction, improve cut quality, and extend tire life.
Figure 6. Tire Pressure
Size PSI bar
22 x 10,0-8 10 0,68
20 x 8,0-8 10 0,68
15 x 6,0-6 12-14 0,82-0,96
TRACTOR AND MOWER
Every 8 Hours or Daily
Check safety interlock system
Clean debris off tractor and mower deck
Clean debris from engine compartment
Every 25 Hours or Annually *
Check mower blade stopping time
Check tractor and mower for loose hardware
Check tire pressure
Every 50 Hours or Annually *
Check tractor brakes
Clean battery and cables
See Dealer Annually to
Lubricate tractor and mower
Check mower blades **
* Whichever comes first
** Check blades more often in regions with sandy soils or
high dust conditions.
ENGINE
First 5 Hours
Change engine oil - see engine manual
Every 8 Hours or Daily
Check engine oil level - see engine manual
Every 25 Hours or Annually *
Clean engine air filter and pre-cleaner **
Every 50 Hours or Annually *
Change engine oil
Replace oil filter
Annually
Replace air filter
Replace pre-cleaner
See Dealer Annually to
Inspect muffler and spark arrester
Replace spark plug
Replace fuel filter
Clean engine air cooling system
* Whichever comes first
** Clean more often in dusty conditions or when airborne
debris is present.
Not
for
Reproduction