Simplex TrueAlarm 4008- 9121, Installation, Programming And Operating Instructions

Page: 13 / 86

Chapter 1. Overview
1-3
- Tone-Alert
- Switches for ACK, Alarm Silence, System Reset,
and Lamp Test
- Key switch to enable switch functions
•
LCD Annunciator
. The 4606-9101 Remote LCD
Annunciator provides remote annunciation of the Fire
Alarm Control Panel (FACP) status. Visual status is pro-
vided by a liquid crystal display and LEDs. Audible
annunciation is provided through a piezo sounder.
Access to the functions of the annunciator can be lim-
ited through the use of the annunciator’s keyswitch.
For Canadian applications, the LCD annunciator is only
suitable for supplementary applications.
4009-9201 and 4009-9202CA (Canadian) NAC
Extender
The 4009-9201/4009-9202CA Notification Appliance Cir-
cuit (NAC) Extenders are self-contained adjunct panels.
The base version of the NAC Extender is a single-board sys-
tem consisting of four NACs, a power supply and charger,
and two conventional NAC inputs that connect to the host
panel for hardwired control of the NAC extender.
Option cards are available to provide the following addi-
tional capabilities:
• 4009-9808 Class A Adapter Option Card -- allows fault
tolerance in the case of open circuit wiring faults on the
NACs.
• 4009-9807 NAC Option Card -- adds four conventional
Notification Appliance Circuits.
Initiating Devices
The 4008 is compatible with the following addressable initi-
ating devices. Up to 200 devices (any combination) are
allowed in the system.
DETECTOR MODULES
•
Photoelectric Detector (4098-9714, 4098-9714C)
is an addressable photoelectric smoke detector that pro-
vides smoke detection by means of optical sense tech-
nology. The detector sends a unique identifier to the
control panel so that it may be easily auto-programmed
and verified during normal operation. The sensitivity of
the detector is 2.5%/ft. obscuration.
•
Heat Detector (4098-9733, 4098-9733C)
is an
addressable heat detector. It has a fixed sensitivity of
135°F, and may also be programmed for 15°F/minute
rate-of-rise operation. The detector sends a unique iden-
tifier to the control panel so that it may be easily auto-
programmed and verified during normal operation.
•
Combination Photo/Heat Detector (4098-9754,
4098-9754C)
is a combination photoelectric detector
and thermal detector in one head. It has the same char-
acteristics as the photo and heat detectors described
above. This device consumes two addresses - one for
the photo and one for the heat. The detector sends
unique identifiers to the control panel so that it may be
easily auto-programmed and verified during normal
operation.
• Duct Detectors.
The panel is compatible with any of
the following duct detectors:
- Two-wire detector without relay (4098-9755)
- Two-wire detector without relay, Canadian (4098-
9755C)
- Four-wire detector with relay (4098-9756)
- Four-wire detector with relay, Canadian (4098-
9756C)
•
Detector Bases.
The detectors described above may
be installed in the following detector bases:
- Detector Base w/o Remote Led Connection (4098-
9792)
- Detector Base w/o Remote Led Connection, Cana-
dian, (4098-9792C)
- Detector Base w/Remote Led Connection (4098-
9789)
- Detector Base w/Remote Led Connection, Cana-
dian (4098-9789C)
- Detector Base w/Relay Drive (4098-9791)
- Detector Base w/Relay Drive, Canadian (4098-
9791C)
- Isolator Base (4098-9793)
- Isolator Base, Canadian (4098-9793C)
- Sounder Base (4098-9794)
- Sounder Base, Canadian (4098-9794C)
- Multi Detector Sounder Base (4098-9795)
Figure 1-2 Remote LED/Switch Annunciator
Module
Fire Alarm Annunciator
CONTROL
ENABLE
Lamp
Test
ACK
Reset
Alarm
Silence
Alarm
Silenced
Power
Comm Lost
Trouble
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
ZONE 7
ZONE 8
ZONE 9
ZONE 10
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com