SVD 800 HD
8
3 USER REMOTE CONTROL RC 3100
RC 3100 is the User Remote Control for normal
programme selection and analogue adjustments (once
the projector is installed). The projector is controlled
by the infrared ray remote control (I.R.) whose
maximum range is approximately 10 metres with new
batteries.
The following figure describes the functions of the
buttons on the User Remote Control.
Fig. 4
1
2
3
4
5
6
7
8
9
/0
ESC...
-
+
•••
EXIT
ENTER
VCR
MEMO
UPC
MUTE
INFO
AV
To select the signal input
directly.
Also used to turn the
projector ON.
To exit any menu
To change the contrast,
brightness, peaking,
hue and colour saturation
values
To access the aux. menu
To recall NORMALISED
values of brightness,
contrast, peaking, hue
and saturation
To select screen format
(Small, Normal, Wide
16/9, Cinema, Letter Box).
To display status and
displayed signal
information
To switch the picture
on/off keeping the
projector on
Not active
To switch the projector
ON or OFF
Will give you a still frame
when the UPC converter
is ON.
To switch the UPC ON or
OFF
To select the type of sync
filter between FAST or
SLOW.
To return to the
previous menu
Down arrow
Left arrow
Right arrow
Up arrow
Displays the selection
menu of the available
video inputs
Confirms choice
To store image
adjustments
Summary of Contents for SVD 800 HD
Page 44: ......
