Sim2 SVD 800 HD, User And Installation Manual

Page: 38 / 44

SVD 800 HD
37
ENGLISHENGLISHENGLISHENGLISHENGLISH
7 DISPLAY PERFORMANCE
7.1 Flyback time
- Horizontal 2.4
µ
s typ.
- Vertical 150
µ
s typ.
- R,G,B video bandwidth: 75MHz, -3dB typical
- Standard video bandwidth: 5.5Mhz, -3dB tipical
- Warm up time (suggested): 10 minutes
7.2 Synchronisation
- Horizontal frequency range:15/72 Khz - automatic
hook-up
- Vertical frequency range:45 to 150Hz - automatic
hook-up
7.3 Full function remote control mod.
RC 3000
Operating mode:
- 1.- wired (using the 8 m/24ft cable supplied)
- 2.- wireless (max operating distance: 10m/30ft)
Functions:
All adjustments can be done using the remote control but
the following can be directly accessed with a key:
- Switching ON/OFF
- Picture muting
- Still frame (freeze)
- Aspect ratio selection
- Single RGB tube power off
- VCR sync filter
- Normalised parameters
- Storable picture adjustments
- Picture adjustments
- Convergence deflection adjustment (installation mode)
- Zone adjustments (installation mode)
- Projector status info
- Video input selection
- Resettable adjustments (installation mode)
- Back lighting by pressing a dedicated button
- If no button is pressed, the light stays on for 20 seconds
more.
- By pressing any button the counter is reset
7.4 User remote control mod.
RC3100
Operating mode:
Wireless (max operating distance:10m/30ft)
Functions:
All adjustments can be modified using the remote control,
some can be directly accessed with a key:
- Turning ON/OFF
- Still frame (freeze)
- Format selection
- Picture muting
- VCR sync filter
- Storable picture adjustments
- Normalised values recall
- Picture adjustment
- Video menu
- Projector status info
- Video input selection
- Options
7.5 Keyboard on the rear panel
Funtions:
- Switching ON
- Input selection
- Picture adjustment
- Info menu
7.6 BNC RGB inputs
BNC connectors:
- R/Cr input 0.7 Vpp, 75 Ohm termination
- G input 0.7 Vpp, 75 Ohm termination, G with synchro/
Y: 1Vpp, 75 Ohm termination, G with synchro / Y: 1Upp,
750 Ohm termination negative synchro.
- B/Cb input 0.7 Vpp, 75 Ohm termination
- RGB video band: 75Mhz, -3dB
- Y Cr Cb band: 40Mhz - 3dB