SVD 800 HD
25
ENGLISHENGLISHENGLISHENGLISHENGLISH
5 THE COMPLETE FUNCTION RC3000 REMOTE CONTROL
5.1 Complete function RC3000
remote control
There are two remote controls for the video projector. One,
the RC3000, is a complete function remote control used
to install the projector while the other one, the RC3100, is
for normal use. Both control the projector with infrared
rays. With the RC3000 remote control you can connect
via cable directly to the video projector’s IR input so as to
avoid any technical problems.
N.B.: (The cable is supplied with the projector. Standard
length is 8m.).
The following pages explain the functions of the buttons
on the RC3000 remote control.
Selects one of the available
screen formats (Small, Nor-
mal, Wide, Cinema, Letter
Box).
Selects the right input directly.
Confirms current choice or goes to
the next page in the current menu.
Returns to the previous menu
or page.
Stores video settings.
Displays the selected video
input menu.
Selects FAST or SLOW sync
filter.
Adjusts peaking.
Adjusts hue for the NTSC
standard.
Resets the adjustments made.
Not active.
Not active.
Lights up the remote control buttons.
In the installation mode, it lets
you enter the convergence
menu.
In the installation mode it lets
you enter the zones menu.
Generates a test signal
selectable from eight dif-
ferent ones.
Enters the video installation
menu.
Displays projector information.
Switches the red tube on/off.
Switches the green tube on/off.
Switches the blue tube on/off.
Switches the green channel
adjustments on/off. In the
video menu it lets you chan-
ge the white balance.
Switches the blue channel
adjustments on/off. In the
video menu it lets you change
the white balance.
Switches the red channel
adjustments on/off. In the
video menu it lets you change
the white balance.
Up arrow.
Right arrow.
Left arrow.
Down arrow.
Still frame (FREEZE).
Adjusts contrast.
Restores the normalised
values of brightness, contrast,
colour, hue, peaking.
Enters the options menu.
Exits any menu.
Adjusts brightness.
Enters the video menu or adjusts
brightness, contrast, colour,
hue, peaking.
Turns the video projector
on/off.
Turns the UPC converter
on/off.
Switches the picture
on/off.
Jack connector for
main cable.
Adjusts colour (saturation).
Accesses the service menu.
Fig. 62
Summary of Contents for SVD 800 HD
Page 44: ......
