SVD 800 HD
35
ENGLISHENGLISHENGLISHENGLISHENGLISH
RESET
RESET PARAMETERS
COLOURS
CONV
CONVERGENCE AND ZONE
ALL
ZONE
ZONE
ALL
Fig. 117
CRT = R G B
PHASE
H. VALUE = XX
MEMORIZE ALL DATA
BANK XX XXK-XXHZ
Fig. 118
CRT = R G B
PHASE
H. VALUE = XX
ALL DATA MEMORIZE
ON BANK XX XXK-XXHZ
5.12 How to reset the adjustments
(RESET)
Note:
Resetting means setting all adjustment values at
50 that corresponds to zero. Starting from this value
you can adjust up to 100 or down to 0.
To reset adjustments read the following instructions
carefully.
If you press the RESET button when you are in the
convergence setups (CONV), you will reset the
convergence parameters and those of the zones of the
three colours R.G.B..
If you press the RESET button when you are in the ZONE
setups, you will reset the zone parameters of the three
colours R.G.B.
The following table shows which parameters are reset
and in which menus.
N.B.:
After RESET, you can recall the previous values by
loading the current bank from the MEMORY MA-
NAGER (LOAD), if the MEMO procedure has not
been carried out.
5.13 How to store the convergence
adjustments (MEMO)
Press MEMO, the following will appear:
press ENTER, the following will appear:
Storing has now been completed on the current memory
bank. Press ESC to exit.
Summary of Contents for SVD 800 HD
Page 44: ......
