Silvercrest 101293, Operating Instructions Manual, Page: 148 / 156

144
SAB 160 B2
GB
♦ Turn the multi-controller 3 to select the display
PH BOOK.
♦ Press the
BD/ENT
button
15
on the device. The display
6
will show
READING
. Subsequently,
PB01
appears and the name and call number of
the fi rst memory slot is shown.
♦ Turn the multi-controller to select additional telephone book entries.
♦ Press the button
2
to dial the selected call number.
♦ Press the button
17
to end the call and exit the directory function.
Deleting the caller lists and telephone book entries
♦ Press and hold the button until
RESET
appears on the display. The
Bluetooth ®
connection will be disconnected and all directory entries and
call lists on the device are deleted.
Audio streaming (A2DP)
The device uses the A2DP profi le (Advanced Audio Distribution Profi le) and can
play back audio data from your mobile phone.
♦ Select an audio fi le from your mobile phone and start the playback.
The entry
A2DP
appears on the device display and the audio data will be played
back via the speakers connected to the device.
NOTE
► On the mobile phone it may also be necessary to switch to playback via
the
Bluetooth ®
stereo headset. Consult the operating manual of your
mobile phone for more information.
► With a few mobile phones, the device does not automatically switch to the
A2DP mode. In this case, you can switch to the A2DP mode by pressing
the
MD/LD
button
5
several times until the notice
BT MUSIC
or
A2DP
appears on the display.
AVRCP (audio video remote control profi le)
The device uses the AVRCP profi le which makes it easier to control audio devices.
♦ You can use the
1/PAU
button
14
on the device to pause or restart play-
back of the audio fi les on the mobile phone.
♦ You can use the ▸▸I
2
or I◂◂
17
buttons on the device to access the previous
or next audio fi le on the mobile phone.
IB_101293_SAB160B2_LB1.indb 144 07.07.14 14:49