Silvercrest 101293, Operating Instructions Manual

Page: 131 / 156

127
SAB 160 B2
GB
Attaching the control panel
♦ First push the left-hand side of the control
panel into the frame, and angle it around
15° upwards.
♦ Then fi rmly press the right side until it locks
into place.
♦ Then fl ip the control panel upwards until it
locks into place.
Check to ensure that the control panel is fi tted cor-
rectly and is securely connected to the main device.
Not installing the control panel correctly can result
in malfunctions when using the device.
Removing the control panel
♦ Press the button to release the control
panel. The control panel tilts automatically
forward.
♦ Incline the control panel around 15° upwards
and push it to the left. First pull the right-hand
side away, then the left-hand side.
Handling and operation
This section provides you with important information on handling and using the
device.
NOTE
► If no setting is confi gured and/or no button pushed within about 5 seconds,
the device returns to its previous operating mode. Changed settings are
saved.
Switching on and off
♦ Press the
/
button
19
briefl y to switch the device on. The
WELCOME
display
6
is shown.
♦ To switch off , press and hold the / button until the notice
GOOD BYE
appears on the display.
IB_101293_SAB160B2_LB1.indb 127 07.07.14 14:49