Silvercrest 101293, Operating Instructions Manual

Page: 133 / 156

129
SAB 160 B2
GB
Setting the operating mode
♦ Press the
MD/LD
button
5
to switch between radio reception (frequency
indicator), CD/MP3 operation (
CD PLAY
), USB connection (
USB PLAY
), memory
slot (
SD PLAY
), audio streaming (
BT MUSIC
or
A2DP
) and audio input (
AUX
).
NOTE
► The operating modes
CD PLAY
,
USB PLAY
,
SD PLAY
and
BT MUSIC
can only
be accessed when the corresponding medium is inserted and/or a mobile
telephone is connected.
Making settings with the SEL button
♦ Press the
SEL
button
16
on the device. The current volume setting is shown.
Each additional press of the
SEL
button accesses the next setting.
The following settings are available:
VOL - Volume (from 0 to 50)
BAS - Bass (from -10 to 10)
TRB - Treble (from -10 to 10)
BAL - Balance (sound distribution between the right and left speakers),
from L=R to 10L and from L=R to 10R)
FAD - Fader (sound distribution between the front and rear speakers),
from F=R to10F and from F=R to 10R)
♦ Turn the multi-controller 3 to change the settings of the menu item displayed.
Further settings with the SEL button
♦ Hold down the
SEL
button for about 2 seconds and then keep pressing the
SEL
button until the required function is shown on the display
6
.
♦ Turn the multi-controller to change the settings of the displayed menu items.
CALL LIST – call lists
NOTE
► In order to use the call list and telephone book function, a mobile tele-
phone which supports
Bluetooth ®
data transmission must be connected
to the device (see also chapter "
Bluetooth ®
operation").
♦ Press the
BD/ENT
button
15
on the device.
IN CALL
appears on the display.
IB_101293_SAB160B2_LB1.indb 129 07.07.14 14:49