Silvercrest 101293, Operating Instructions Manual

Page: 138 / 156

134
SAB 160 B2
GB
Radio functions
Select frequency range
♦ Press the
BD/ENT
button
15
to switch between FM (
F 1
,
F 2
,
F 3
) and
medium wave (
M 1
,
M 2
).
Automatic station search
♦ Press ▸▸I
2
or I◂◂
17
briefl y to start an automatic station search.
The search stops when a station is found.
Manual station selection
♦ Hold down either ▸▸I or I◂◂ for two seconds,
MANUAL
appears on the
display
6
.
♦ Now press either ▸▸I or I◂◂ briefly to change the frequency in 0.05 MHz
(VHF) or 9 kHz (MW) increments until the required frequency is set.
If no button is pressed for approx. two seconds, the automatic station search is
set again. The display will read
AUTO
.
Storing radio stations
6 stations can be saved in each frequency range.
♦ Keep one of the
1/PAU
to
6/FL+
buttons (
14
–
9
) pressed for about
2 seconds to store the station currently selected. The numbers
1
to
6
will
appear on the display to indicate a successful save.
Searching for stations with alternative frequencies
♦ Press the
SCAN/REC
button
18
to search for stations with an AF signal in
the FM band range.
The search stops for 5 seconds at each station found and then continues.
♦ If you want to listen to and save the station, press the
SCAN/REC
button to
stop the search.
♦ Keep one of the
1/PAU
to
6/FL+
buttons pressed for about 3 seconds to
store the currently selected station. The numbers
1
to
6
will appear on the
display to indicate a successful save.
Selecting stored stations
♦ Select the frequency range with the
BND/ENT
button.
♦ Press one of the
1/PAU
to
6/FL+
buttons to call up the stored station.
IB_101293_SAB160B2_LB1.indb 134 07.07.14 14:49