Silvercrest 101293, Operating Instructions Manual

Page: 130 / 156

126
SAB 160 B2
GB
CAUTION
Possible damage to the cable
► To avoid damage, keep an eye on the position of the cables when sliding
the device into the bay. Damaged cables can cause a fi re hazard!
♦ Carefully push the device into the installation bracket
39
until it locks into
place.
♦ After all connections have been made, activate the
RESET
button
23
with
a ballpoint pen or other pointed object.
♦ Attach the control panel as described in "Installing the control panel".
♦ Finally put on the bezel frame
38
.
Removing the device
To remove the installed device, proceed as follows:
♦ Remove the bezel frame.
♦ Insert the right and left keys
40
into their respective slots on the sides of the
device. Ensure that the elevations on the spanners are facing outwards (the
tabs have now been bent back).
♦ Pull the device out.
Initial operation
Control panel
You can remove the control panel from your device as an anti-theft measure.
Do not keep the control panel in your vehicle after removal.
NOTE
► When the control panel is not inserted into the frame, the theft protection
LED
21
on the device blinks.
► Always keep the control panel in its case
37
to protect it.
IB_101293_SAB160B2_LB1.indb 126 07.07.14 14:49