Silvercrest 101293, Operating Instructions Manual, Page: 126 / 156

122
SAB 160 B2
GB
Installation
WARNING
Damage may be caused when installing the device
► If possible, have the device installed by a qualifi ed technician.
► If you wish to install the device yourself, follow the instructions for connection
and installation for safe, fault-free use of the device. Incorrect installation can
result in a fi re hazard!
Connection
CAUTION
Using incorrect connections can cause damage to the device.
► Use the device's ISO connections when installing the device. Any vehicle-
specifi c ISO adapters you may require can be sourced from a specialist
workshop, a local dealer or a general store's technical department. Using
other connector types voids the warranty.
Assignment of the ISO connections
The view is from behind the plug connector.
1 3 5 7
2 4 6 8
ISO A (power
supply assign-
ment)
Assignment
1 Not used
2 Not used
3 Not used
4
Permanent plus 12 V
(terminal 30)
5 Aerial control voltage
6 Not used
7
Ignition circuit positive
12 V (terminal 15)
8
Negative (-) ground
(terminal 31)
1 3 5 7
2 4 6 8
ISO B (speaker
connection as-
signment)
Assignment
1 Rear right +
2 Rear right -
3 Front right +
4 Front right -
5 Front left +
6 Front left -
7 Rear left +
8 Rear left -
To connect the device to two speakers, only use the cables for the front speakers.
IB_101293_SAB160B2_LB1.indb 122 07.07.14 14:49