Silvercrest 101293, Operating Instructions Manual

Page: 146 / 156

142
SAB 160 B2
GB
Bluetooth
®
operation
The microphone unit must be connected to the device in order to use the
Bluetooth
®
functions. A mobile phone that supports
Bluetooth
® data transfer is also required.
Connecting the telephone to the device
♦ Activate the
Bluetooth ®
function on your mobile telephone and carry out
a search for
Bluetooth ®
devices.
After a successful search, the entry
CarBT
appears for the device on the display
of the mobile phone.
♦ Select this entry to connect and when the subsequent password request
appears, enter the password
1234
for the device. You may have to confi rm
the connection again.
After a successful pairing,
CONN OK
appears briefl y on the device display
6
and
the green LED
36
on the microphone unit lights up.
Using the microphone
During a telephone call you will hear the caller via the speaker connected to the
device.
♦ For optimal transmission of your voice, place the microphone unit close to
you.
♦ Attach the microphone unit, for example, to the dashboard. You can use the
supplied adhesive strip to do this. If you use this option, you must clean any
dust and grease from the surface beforehand. The adhesive strip can be
used for securing on almost all smooth surfaces.
NOTE
► Do not mount the microphone unit close to any speakers as this may
adversely aff ect the voice quality.
Accept/end call
When an incoming call is received, you will hear the call signal via the speakers
attached to the device and via your mobile telephone. The call number is shown
on the device's display.
♦ You accept an incoming call by pressing the TALK button
35
on the micro-
phone unit or the button
2
on the device.
♦ You end the call by pressing the
TALK
button on the microphone unit again
or by pressing the button
17
on the device.
IB_101293_SAB160B2_LB1.indb 142 07.07.14 14:49