Silex technology BR-310AC, User Manual

Page: 106 / 108

100
BR-310AC User's Guide
A LAN port error has occurred (POWER LED: Blinks rapidly, WLAN LED: OFF, STATUS LED: ON).
The bridge feature may be aborted as the non-wireless device is unplugged and
changed to the other device on the LAN port.
Solution Restart the BR-310AC.
In
Single Client Mode
, if the non-wireless device is unplugged and changed
to the other device, BR-310AC will abort bridging of that device, taking such
occurrence as an error.
Also, when the MAC address filtering is used to restrict the devices to bridge, you
will need to change the setting registered to
Network Device Address
.
This error does not occur in
Multi-Client Mode
. The restart is not required then.
Several devices may have been connected to the BR-310AC using a HUB, though it is
operating in
Single Client Mode .
Solution
In Single Client Mode , connect only one device to the LAN port of BR-310AC. To
use several devices, use Multi-Client Mode .
I cannot access the non-wireless device connected to a LAN port of the BR-310AC.
The BR-310AC or non-wireless device may not be operating correctly.
Solution Please check the LED status on BR-310AC. Please also check that the non-wireless
device is properly powered on.
The connection may be restricted by the MAC address filtering on BR-310AC.
Solution
See the setting at Network Device Address to check that access of the
connected device is not restricted by the MAC address filtering.
The connection to the non-wireless device is lost.
The connection may be timed out.
Solution If the connected non-wireless device is idle and no communication occurs
from it for 5 mins, BR-310AC automatically cuts a link with it. To recover the
communication, try to do anything that can cause communication packets
on the non-wireless device. For the connection not to be timed out again, it is
recommended to disable the sleep mode on the non-wireless device.
(Example) If the connected non-wireless device is a printer and the printer has
turned into a sleep mode, printing will become unavailable as BR-310AC will
disconnect a link with the printer.
To get printing ready again, wake up the printer from a sleep mode using the
control panel on it to make a communication from the printer to BR-310AC.