Silex technology BR-310AC, User Manual

Page: 47 / 108

4. How to Configure BR-300AN
41
4.
Press the WPS button on your Access Point.
Confirm that your Access Point is ready for a wireless connection to be made.
Access Point
WPS
Press the switch
- The name, position and shape of the WPS button will differ depending on your Access Point.
For details, refer to the operation manual that came with your Access Point.
- Please use only one Access Point. If two or more Access Points are waiting for wireless connections, BR-
310AC will not be able to connect properly.
5.
Press and hold the push switch on the BR-310AC. The WLAN LED and STATUS LED will
start to blink Green together.
When the WLAN LED keeps blinking Green while STATUS LED turns off, release the push
switch (it may take 15 sec until the STATUS LED turns off after the WLAN and STATUS LEDs
blink together).
②
①
Push Switch
Keep pressing
WLAN
STATUS
④
③
Confirm
STATUS LED
turns off
Release your finger
WLAN
STATUS
Confirm
these LEDs
blink Green
together
Push Switch
BR-300AN
BR-300AN
Note