Silex technology BR-310AC, User Manual

Page: 28 / 108

22
BR-310AC User's Guide
Single Client Mode
Use this mode when you connect a single non-wireless device to the BR-310AC. As the
MAC address and IP address of the connected device are used for wireless LAN connection,
you can use the device as if it is directly connected to a wireless LAN.
BR-300AN
Access Point
(Wireless Router)
Non-wireless device
(Printer)
MAC address and IP address of the
connected non-wireless device
are used for wireless connection.
Connect a single non-wireless device.
- Only one device can be connected to a LAN port.
- The following actions are treated as an error. If one of these occurs, the bridge function will abort.
- Connecting multiple devices to a LAN port using a HUB
- Changing the device connected to a LAN port to the other device while BR-310AC is running.
- If the connection is lost on a LAN port while communication is in progress, wireless bridging will be
disabled until it is reconnected.
- The devices with multiple MAC addresses cannot be used (e.g. PC with a load balancing feature, etc).
- Due to restrictions of the protocols, "
View full map " of " Network and Sharing Center " is not fully
supported on Windows Vista / 7.
TIP