Siko AP20S, User Manual, Page: 28 / 79

Parameters
AP20S
Date: 24.08.2020 Art. No. 89992 Mod. status 133/20 Page 28 of 79
Display Error Possible effect Corrective actions
None EEPROM read/write error Incorrect
parameterization at
restart Contact support
Table 20: Corrective actions
A list of errors that occurred can be read in the Diagnosis/Error memory operating menu
(see chapter
3.7.2.1 ). This error memory can be deleted via the EPN interface with the system
command FFh with data content.
4 Parameters
Parameters are classified. The classes E, N, S, V and PD can be separately reset to factory
settings if necessary (see chapter
3.7.3 ).
Parameter classes Character
Error memory E
Network parameters N
Standard parameters S
Visualization parameters V
Process data PD
Chapter starting with page
Network configuration 72
Positioning 30
Visualization 39
LEDs 43
Options 46
Device information 60
Error memory 66
4.1 Parameter overview
Name Description see page
0001h: Control Word Control word 36
0002h: Display Data Display content in display mode 47
0003h: Target Value Target value 37
0004h: Status Word Status word 37
0005h: Actual Value Actual value 38
0007h: Generic Mapping Channel Selectable data channel 65
0008h: Error Status Error status 71
000Ah: Module Parameters Internal parameter of the network
module 59
000Ch: Generic Mapping Parameter Data channel selection parameter 57