Mounting
Instruction Manual ScrubberGuard
14830E/1
29
Installation is made as follows:
WORKSTEP
ADDITIONAL INFO / IMAGES
1.
Set up the system in the desired position and
fasten to the ground at the four corners using
two M8 screws per foot (arrows).
2.
Remove the transport locks on the Scrub-
berGuard (arrows).
3.
Mount the pH probe in the holder according to
Section 4.3.1.
4.
Attach the sample connections according to
Section 4.3.2.
A: Sample inlet
B: Sample outlet
Shut-off valves must be present at the
customer at the sampling point and sample re-
turn point.
5.
Install the optional accessories according to
Section 4.4.
Summary of Contents for AquaScat SG
Page 6: ......
