SIGRIST AquaScat SG, Instruction Manual

Page: 41 / 120

Electrical installation Instruction Manual ScrubberGuard
14830E/1 41
5.5.4 Overview of Profinet IO

To connect to the Profinet IO, the Profinet IO module must be integrated in the AquaS-
cat SG.

The module has an internal switch and provides two Ethernet ports.

The cable is connected directly to the RJ45 plug of the Profinet IO module inside the in-
strument or via external M12 connectors.
When connecting directly to the RJ45 plug, please note that only plugs with a short
and flat design can be used.

In the Digi.interf.\General menu, the Modul type must be set to Profinet IO .

In the Digi.interf.\Profinet menu, the station name, MAC address and connection sta-
tus are shown. Moreover, it can be defined here whether the data should be read only
or be read / write.
Figure 13: Overview of the Profinet IO module

Field bus interface for Profinet IO
(connection print)

Connector for AQ2Basi print

Ethernet port 1

Ethernet port 2