Sifam Tinsley Theta 30P, Operating Manual

Page: 38 / 84

Editing Existing Start
value
Pressing the “ Down” key will
not affect the value of first digit, it is
always 0.
Pressing the “ Up” key will advance
(*Denotes that digit will be flashing).
*
the operation to the next digit and
After, first digit gets entered, it will
Pressing the “ Down” key will scroll
the value of the second digit from
next digit Pressing the “ Up” key will advance the operation to the
and set the second digit, in this case to “0”.
*
prompt for second digit.
(*Denotes that digit will be flashing).
0 to 9 and it will roll back again to 0
on second digit set.
a set the third digit, in this case to “0”. nd
*
38
or it will get restricted by end value set.
After, second digit gets entered, it will
Pressing the “ Down” key will scroll
the value of the third digit from
prompt for third digit.
(*Denotes that digit will be flashing).
0 to 9 and it will roll back again
to 0 or it will get restricted depending
Elbow value of Output 2 selection (section 3.1.9.2.3) if elbow function
of input is enabled otherwise advance to the Mode selection
(section 3.1.9).
set the first digit, in every case to “0”.
Pressing the “ Up” key will advance the operation to the next digit