Sifam Tinsley Theta 30P, Operating Manual

Page: 32 / 84

depending on third digit set.
Pressing the “ Up” key will advance the operation to the “elbow value
*
Confirmation of Elbow value
Pressing the “ Down” key will
re-enter to the Elbow value edit mode”. “
Pressing the “ Up” key will
confirm Elbow value and advance
to the
output characteristics Selection
The End value of Current Output should be 20mA & Voltage output should be
Pressing “ Up” key will confirm
the present value as End value of
the Output 1 and advance to the Start
value of Output 1(section 3.1.9.1.2).
3.1.9.1: Output 1 Characteristics Setting
3.1.9: Output Characteristics Setting
3.1.9.1.1: End value of output 1
This screen
will only appear to show output1 End value .It’s not editable.
32
Pressing “ ” key value remains
constant because End value is fixed.
Down
After third digit gets entered, it will
Pressing the “ Down” key will
scroll the value of the fourth digit
again to 0 or it will gets restricted
prompt for fourth digit.
(*Denotes that digit will be flashing).
from 0 to 9 and value will roll back
Confirmation” mode and set the fourth digit, in this case to “6”.
(section 3.1.9).
10 V or depends upon user specified factory setting.