After third digit gets entered, it will
(*Denotes that digit will be flashing).
Pressing the “ Down” key will
scroll the value of the third digit from
0 to 9 and the value will roll back again
the next digit
Pressing the “ Up” key will advance the operation to
a
set the third digit, in this case to “6”.
nd
*
prompt for fourth digit.
to 0 or value will get restricted depending on the value of second digit.
Pressing the “ Down” key will
scroll the value of the fourth digit
from 0 to 9 and the value will roll
Pressing the “ Up” key will advance the operation to the next digit
restricted depending on the value of third digit.
*
back again to 0 or value will get
Confirmation of End value
Pressing the “ Down” key will
re-enter to the Input End value
“
Pressing the “ Up” key will
and
edit” mode.
confirm end value of Input
(section 3.1.8.2).
27
After second digit gets entered, it
will prompt for third digit.
(*Denotes that digit will be flashing).
And set the fourth digit, in this case to “6”.
advance to the Start value of Input selection
Summary of Contents for Theta 30P
