Sifam Tinsley Theta 30P, Operating Manual

Page: 35 / 84

Confirmation of Start value
Pressing the “ Down” key will
re-enter to the Output 1
Start
“
Pressing the “ Up” key will confirm
Start
value and advance to the
(section 3.1.9.1.3) if input elbow is enabled or output 2 characteristics
value edit ”mode..
selection of Elbow value of Output
Pressing “ Up” key will the
present value as
Elbow
value of the
Output 1 and advance to the Output
set
Pressing the “ Down” key will
enter the “ Output 1 Elbow value
edit” Mode.
3.1.9.1.3: Elbow value of output 1
2
Characteristics selection(section 3.1.9.3).
35
This screen appears only when Elbow is enabled. This screen allows
user to set Elbow value in-between start value and end value set.
Editing Existing Elbow
value
Pressing the “ Down” key will
scroll the value of the first digit from
0 to 2 and it will roll back again to 0 or
value set . the Pressing the “ Up” key will advance the operation to
next digit and set the first digit, in this case to “1”.
(*Denotes that digit will be flashing).
*
it will get restricted by start value and End
setting(section 3.1.9.3)