Sifam Tinsley Theta 30P, Operating Manual

Page: 24 / 84

After gets it will third digit entered,
Pressing the “ Down” key will scroll
the value of the fourth digit from 0
to 9 and the value will roll back
Pressing the “ Up” key will advance the operation to the “ Address
depending on third digit set.
Confirmation of Address Value
Pressing the “ Down” key will
re-enter to the Address value edit”
“
Pressing the “ Up” key will confirm
Address value and advance to
*
3.1.7.2: RS 485 Baud rate
This screen allows the user to set Baud
Rate of RS 485 port. The values
Pressing “ Up” key the present value
advance to the RS485 Parity Selection(section 3.1.7.3).
will confirm as Baud rate and
Pressing the “ Down” key will enter
into the “Baud Rate edit” mode and
scroll the value between 2.4, 4.8, 9.6 ,
19.2 and value will roll back again to
2.4(values are flashing).
prompt for fourth digit.
again to 0 or it will get restricted
mode.
Baud Rate selection (section3.1.7.2) .
displayed on screen are in kbaud .
24
(* denotes that digit will be
flashing).
value confirmation”mode and set the fourth digit, in this case to “1”.