Sifam Tinsley Theta 30P, Operating Manual

Page: 37 / 84

Pressing the “ Up” key will confirm
Confirmation of Elbow value
Pressing the “ Down” key will
re-enter to the
Elbow
value edit” in “
Elbow
value
and
advance to
mode.
the Output 2 characteristics
3.1.9.2: Output 2 Characteristics Setting
3.1.9.2.1: End value of output 2
This screen
will only appear to show output End value of Output 2. It’s not editable.
Pressing “ Up” key will confirm the
present value as End value and
advance to the Start value of Output
2 (section 3.1.9.2.2).
Down
constant because output 2 End value
is fixed.
Pressing “ ” key value remains
The End value of Current Output should be 20mA & Voltage output should be
Pressing “ Up” key will confirm
the present value as
Start
value of
the Output 2 and advance to the
Pressing the “ Down” key will
enter the “Output 2
Start value
edit” mode.
3.1.9.2.2: Start value of output 2
This screen allows the user to set the value of Output. For Apparent
Start
transducer range of Start value setting can be done is 0 to 20% of
End value. For active/reactive/power factor/phase angle transducer
range of Start value setting can be done is -100% to 20% of End value.
selection(section 3.1.9.2).
10 V.
37