Sifam Tinsley Theta 30P, Operating Manual

Page: 26 / 84

Pressing “ Up” key will confirm the
present value as Input End value
and advance to the Start value of
Input (section 3.1.8.2).
Pressing the “ Down” key will enter
into “Input End value edit” mode.
Editing Existing Input End value
Pressing the “ Down” key will
scroll the value of the first digit from
0 to 5
the value will and roll back again
Pressing the “ Up” key will
advance the operation to the first digit, in this the next digit and set
(*Denotes that digit will be flashing).
*
After first digit gets entered, it will
(*Denotes that digit will be flashing).
Pressing the “ Down” key will scroll
the value of the second digit from
0 to 9, and the value will roll back
on the value of first digit. Pressing the “ Up” key will advance the
operation to the next digit and set the second digit, in this case to “0”.
*
prompt for second digit.
again to 0 or get restricted depending
26
3.1.8: Input Characteristics Setting
3.1.8.1: End value of Input
This screen allows the user to set the End value of Input with respect
to system type & Transducer type. Allowable range of End value is
30% to 130% of Rated power.(Consider that we have Selected the
Input as Apparent Power.)
to 0.
case to “5”.