manualshive.com logo in svg

Siemens TM Timer DIDQ, Commissioning Manual

Share
Download
Siemens TM Timer DIDQ Commissioning Manual Download Page 52

3.3.4.4

Other information

Note
The technology modules and the individual channels may only be reparameterized in offline 

state. All changes become effective only after saving, compilation and eventual download of 

your changed user project to the controller (see Chapter Saving and compiling a user project 

with SCOUT/SCOUT TIA (Page 60)).

3.3.5

Use of I/O channels

3.3.5.1

Introduction

After configuring the technology modules as described in section Configuring I/O channels 

(Page 48), the channels can be used in your user project. 
In Chapter Linking technology objects with TM Timer DIDQ (Page 52) using an example, it is 

shown how channels DQ0 (Timer DQ) and DI1 (Timer DI) are interconnected with technology 

objects TO cam or TO measuring input . 
In Chapter Linking symbolic I/O variables with TM Timer DIDQ (Page 55), using an example, 

it is shown in the address list how a variable 'var_QI_MI' can be assigned via symbolic 

assignment of the quality information QI of the measuring input input.
You can find an overview of the I/O points of the channels in Chapter Overview of the I/O points 

of the channels (Page 58).

3.3.5.2

Linking technology objects with TM Timer DIDQ

In the following example, the configured I/O channels (see section Configuring I/O channels 

(Page 48)) are linked with one output cam technology object and with one measuring input 

technology object. 
Cam outputs and measuring input inputs are assigned with the assignment partners CAM_n 

or MI_n.     

Note
This assignment is only possible if Profinet communication was completely configured (see 

Chapter Requirements for operation (Page 42) and Creating and configuring a technology 

module (Page 43)).

Configuring
3.3 SIMOTION SCOUT TIA

Technology Modules TM Timer DIDQ for SIMOTION SCOUT and SIMOTION SCOUT TIA

52

Commissioning Manual, 01/2015

Summary of Contents for TM Timer DIDQ







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands